The Swiss Battery Technology Center operates the Battery Testing Laboratory together with the BFH Center for Energy Storage in a public-private partnership. The largest battery laboratory in Switzerland for cell and module testing enables start-ups, SMEs or large companies to test their energy storage systems in a complete environment with the help of experts. Together in innovation projects or single runs, the SBTC and the BFH center can test and improve your technologies
SHARE
Battery Testing Laboratory
Battery cells and modules of all sizes can be tested in the Battery Testing Laboratory. During characterization, the batteries are tested under various conditions such as temperature, charge and discharge currents and depths of discharge. The characterization is the basis for the parameters for the battery management system. In addition to cyclic ageing tests, we also offer the High Precision Coulombic Efficiency method, in which statements on battery ageing behaviour can be made after only 50 to 100 cycles and about one month. Additional information on the physical behaviour of battery cells can be obtained with electrochemical impedance spectroscopy.
Contact us to benefit from our facilities and expertise
Our test infrastructure
- Largest battery laboratory in Switzerland for cell and module testing
- 124 cell test channel / 15 module test channel
- Public private partnership with the BFH-Energy Storage Research Centre (Prof. Dr. Andrea Vezzini)
Infrastructure
7x ESPEC ARU-1100 Temperature Chamber
Temperature range: | -45°C to 180°C |
Safety rating: | 4x hazard level 4 | 3x hazard level 6 |
Volume: | 1100l |
Max weight: | 50kg to 200kg |
Allowable heat load: | 4500W |
4x ESPEC LU-114 Temperature Chamber
Temperature range: | -20°C to 85°C |
Safety rating: | hazard level 4 |
Volume: | 105l |
Max weight: | 50kg to 200kg |
Allowable heat load: | 4500W |
3x PEC ACT0550 Cell tester
Channels: | 40 channels |
Current range: | 0 to 50A per channel | max 1000A in parallel |
Accuracy: | +/- 0.03% FSD |
Voltage range: | 0 to 5V |
Sampling frequency: | 1ms |
1x PEC SBT10050 Module tester
Channels: | 12 channels |
Current range: | 0 to 50A per channel | max 600A in parallel |
Accuracy: | +/- 0.02% FSD |
Voltage range: | 0 to 100V |
Sampling frequency: | 1ms |
1x Gamry Reference 3000 & 30k Booster
Electrochemical Impedance Spectroscopy
Current range: | 0 to 3A |
Booster: | up to 30A |
EIS | 10 μHz – 1 MHz |
